User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » virtual dyno Page [1]  
glassssssss
All American
29099 Posts
user info
edit post

Has anyone else tried it?
would be cool to see some people post up their results

I have been playing with the software lately, it calculates power based on info about your car and data logged during a WOT pull. It is surprisingly accurate.
https://innovativetuning.wordpress.com/our-experiments-with-virtual-dyno/

In my 240 I am using the built in logging function of the nismotronic ecu which I set up to automatically record a log when the tps is between 75-100%. These logs are exported as a csv (spreadsheet) file and can be read by virtual dyno.
I just picked up a bluetooth obdlink data scanner and will do a run with my mazda 6, if your car is 1996 or newer you should be able to record a log like this.

(red line is the first pull using the same fuel tables and settings from the phantasm tune file, blue line is after i adjusted the fuel tables in the high load areas)

2/11/2015 6:43:24 PM

Hiro
All American
4673 Posts
user info
edit post

Sounds cool. And it's free! I might look into this..

http://www.virtualdyno.net/

2/11/2015 7:38:48 PM

tchenku
midshipman
18586 Posts
user info
edit post

12:1

F that 11:1 mess

[Edited on February 11, 2015 at 8:32 PM. Reason : the SR or RB?]

2/11/2015 8:28:53 PM

arghx
Deucefest '04
7584 Posts
user info
edit post

I've played around with it. You have to make sure the conditions you set in it are right, and you use clean datalogs. It can be manipulated of course, but as people point out, it works on the same principle as an inertia dyno. That's close enough for what most people want to do.

I don't put a whole lot of stock in the numbers per se, same with inertia dynos in general (typical dynojet), but for before&after comparison and general adjusting of torque & power curve it's useful.

2/11/2015 9:04:36 PM

glassssssss
All American
29099 Posts
user info
edit post

this is with the sr car


(tried to log a run in my mazda but the csv file didn't compile correctly)

going to try different software soon

2/11/2015 9:43:32 PM

glassssssss
All American
29099 Posts
user info
edit post

so I have been tweaking fuel map slightly and making more power... and now I have a new problem. I'm spinning tires in 3rd as soon as it hits boost
throws off the calculations a bit

I need fatter tires





[Edited on February 14, 2015 at 11:15 AM. Reason : .]

2/14/2015 11:09:52 AM

dustm
All American
14296 Posts
user info
edit post

lol

2/14/2015 2:45:11 PM

arghx
Deucefest '04
7584 Posts
user info
edit post

capitalpull.csv

2/14/2015 3:59:57 PM

BlackJesus
Suspended
13089 Posts
user info
edit post

VTECH kicked in yo

Quote :
"capitalpull.csv"


I'mma need you to come to glenwood dragway.

[Edited on February 14, 2015 at 4:23 PM. Reason : .]

2/14/2015 4:22:25 PM

glassssssss
All American
29099 Posts
user info
edit post

Just mounted this bad boy in the car so I can switch maps and log in virtual dyno on the go
This thing is awesome..full windows 8.1 in a 8in tablet

2/18/2015 7:57:54 PM

 Message Boards » The Garage » virtual dyno Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.39 - our disclaimer.