Again, this is a bit of a long shot for TWW but who knows?

This system is a refrigerated compressed air dryer with a second stage 3 micron particle filter. Capable of handling compressors up to 30HP and 125 SCFM air flow it has enough capacity for almost any size shop. Clean, well maintained, fully tested, and ready to go.

While its capacity might be overkill for some, its requirements aren't . . . . it takes regular single phase 115V and is neither very big or heavy. Virtually maintenance free, just change the filter every few years and keep the coils from getting too dirty.


This system is PERFECT for any application where you need or want truly clean and dry compressed air. Spray painting, machine tools, or even just to protect your expensive air tools . . . you won't find better. A system like this would usually put you back some serious $$$. At this price, its less than the cheapo Harbor Freight Chinese-made systems with 1/10th the capacity (and certainly beats the hell out of inline filters with moisture traps that have to be drained and changed constantly).



Specifications:

Speedaire By Dayton 4XX30 Refrigerated Air Dryer


Type: Refrigerated
Item: Compressed Air Dryer
Max. Air Compressor HP : 30
Inlet/Outlet (In.): 1-1/2 NPT
Voltage: 115
Phase: Single
Max. Inlet Temp. (Deg. F): 120
Max. Ambient Temp. (F): 100
Refrigeration Compressor (HP): 1/2
Refrigerant: R-134A
Finish: Heavy Duty Powder Coated
Height (In.): 27
Width (In.): 24
Depth (In.): 30
Features: On/Off Switch and Power On Light
Includes: 3 Micron Solid Particle Filter and 6 Foot Power Cord
Weight: 200 lbs
SKUs: 4XX30
Air Flow @ 38 Degrees Fahrenheit Dew Point Pressure 125 CFM,
Air Flow @ 50 Degrees Fahrenheit Dew Point Pressure 163 CFM


Asking $500

7/17/2012 6:50:12 PM