I need help soldering this LCD into my car's dash. I got the old one out but I don't have the tools to get this one in properly. Please let me know if you're willing to do it for $50. It's probably a 20-30 min job. Here are some pics:

http://i55.tinypic.com/34t1j13.jpg
http://i55.tinypic.com/ayvx8k.jpg
http://i51.tinypic.com/2412k37.jpg

12/16/2010 10:36:52 PM

Out of curiosity, what did you get it out with that you can't get it back in with?

12/17/2010 6:58:32 AM

Yeah, how did you get it apart? It's a bit hard to tell from the pics if a regular iron will work. I have a hot air gun but I'm 3 hrs away.

12/17/2010 7:18:40 AM

that aint going to be easy. What pitch is that? Only iron tip I have is thick

12/17/2010 8:35:20 AM

My boy got this, be good and clean just like in the prison when he was making radios.

12/17/2010 9:25:06 AM

I got it out with my iron, but now I tape it back in place and hit it with my iron and it doesn't stick...I can't get any solder to stick to the ribbon...any ideas?

12/17/2010 9:50:17 AM

You need to remove the old solder and probably get some flux on there to clean the pads up. A fine tip iron, some fine solder, and a lot of patience are going to be required.

[Edited on December 18, 2010 at 8:33 PM. Reason : .]

12/18/2010 8:32:29 PM