I have a junk SR20 FWD for a G20 or SE-R or 200sx in my garage. I need this thing gone. Where can i take it for scrap metal around the Raleigh area?
11/12/2009 8:46:52 AM
Jeepman's house, just leave it with the rest of the shit behind the garage
11/12/2009 9:05:25 AM
not true TT&E in Garner is a scrapyard
11/12/2009 10:05:34 AM
raleigh metal recycling on garner road... right where it goes under 440/40i think i get 10c a pound? i have a company account w/ them though
11/12/2009 10:24:01 AM
is this a full longblock with manifold etc? I might be interested in buying it off of you just so I'd have something to tear down for fun. It's nice to tear something down and not have to worry about putting it back together.
11/12/2009 10:38:59 AM
both manifolds are off (I do have them though), head is still attached to block
11/12/2009 10:48:11 AM
PM sent
11/12/2009 10:53:22 AM
Why is it junk. Did it throw a rod through the side of it.
11/12/2009 3:57:30 PM
maybe he crashed it into a light pole shitfaced drunk
11/16/2009 7:29:20 AM
headgasket blew on the way to work. water was shooting out tail pipe, lol.Drove it from Gorman street exit to durham freeway with no water.
11/16/2009 9:01:41 AM
Lol that sucks. If don't want a front drive project right now.
11/16/2009 11:02:01 AM
speak engrish mother fucker
11/17/2009 2:14:09 PM
what I said was pretty clear.
11/17/2009 6:14:20 PM
11/19/2009 7:33:23 AM
i understood him clearly.
11/19/2009 4:54:12 PM
WAT
11/19/2009 4:55:21 PM
11/19/2009 5:03:37 PM
^^^cause you are used to listening to him with your cock in mouth
11/19/2009 7:09:05 PM
It was a junk engine alright.
12/5/2009 3:11:39 AM
is that a hole in the piston?
12/5/2009 3:02:58 PM
looks like it..or at least a deep dent[Edited on December 5, 2009 at 3:07 PM. Reason : a][Edited on December 5, 2009 at 3:07 PM. Reason : god dammit]
12/5/2009 3:07:03 PM
it's a holeas MadDriver20 said, it ran very very hot and blew a headgasket. I saved the headgasket, it was completely fucked. There's also a chip in the cylinder wall in the bottom right of the cylinder wall, 2nd pic.Also I didn't realize that you have to pull the oil pickup to get the front cover off (annoying design). After loosening all the other bolts we got pissed at the thing and broke the front cover off with a sledgehammer just for the hell of it.[Edited on December 6, 2009 at 10:40 AM. Reason : those two headbolts were a bitch, took an hour to get them off]
12/6/2009 10:37:51 AM