That uses 3/4-16 thread, a gasket (2.834 od, 2.462 id), and is shorter than 3 inches, also narrower than 3 inches too would be great.

This is why: 302 swapped into a toyota truck, motor mounts hits regular filter (ph8a) that was on it. so whoever put it on/i guess put the motor in just dented the shit so it would work.

I need a shorter/skinnier filter so that it will clear and screw on.

I've looked through wix stuff and it looks like a few might work, but some of the gaskets are slightly smaller, will that matter?

51311
51056
51348
51056

thx garage ppls

4/11/2009 8:38:23 PM

get a remote kit for it.


http://store.summitracing.com/egnsearch.asp?N=400158+301916+115&autoview=sku

[Edited on April 11, 2009 at 8:49 PM. Reason : jhfgd]

4/11/2009 8:48:20 PM

i would but it's not my truck and the dude probably will want to do it cheaply, but i'll run it by him.

i end up continually shaking my head looking at the ghetto shit that the whoever did the swap did.

4/11/2009 8:52:10 PM

shorter than 3" ph16a.

4/11/2009 9:48:57 PM

the 51311 is the only one that will work, two of the others are lawnmower filters, and the last is not a full flow



its a volvo filter btw, also, you should know that jeep filters are 3/4-16, same size and a tad over 3"

[Edited on April 11, 2009 at 10:36 PM. Reason : 51311 is the shorter filter used by ford and chrysler from 70's to 90's]^ shorter than the standard 518



[Edited on April 11, 2009 at 10:37 PM. Reason : and the 51311 has the correct gasket size, bypass pressure, etc.]

4/11/2009 10:33:43 PM

cross a purolator # L10241
It'll work

4/12/2009 12:49:54 PM

l17019 worked. cross ref's from the 15311. thanx

4/12/2009 1:35:46 PM

69 owns another thread.

I think we should donate some money to this guy

4/12/2009 2:08:09 PM

i figured he would be the one to help me out

4/12/2009 5:34:09 PM

ngr plz, since napa and carquest use the same numbers, i can rattle off wix filter numbers like rainman

4/12/2009 6:56:04 PM