(and still in driveable condition.. i.e. not exploded)

j/w before I get down and dirty tomorrow

1/30/2009 3:32:35 PM

there will be less fluid drained from the housing, for one.

1/30/2009 3:33:57 PM

none, i ran one dry for months and it just locked up one day, other than that it ran great

1/30/2009 4:18:31 PM

on a side note:

I couldnt figure out why i had some rust going on in my axle housing, fucking cover was sealed and dry when i removed it, no leaks on my axle seals....then a friend reminded me of the breather tube...I had mounted it in the wrong spot

1/30/2009 4:26:14 PM

shoulda just filled it with wd-40


on a side note, did you know that 75w gear oil has the same viscosity as 30w crankcase oil?

1/30/2009 9:02:12 PM

come again? im running 85-90w (call me retarded i cant remember if that's what's spec'd). I know it ran out like honey when i pulled the cover



is there some graph or unit of viscosity comparo you can show? I thought the scale used for "weight" is consistent across the board



SCHOOL ME, 69

1/31/2009 12:19:43 PM

1/31/2009 1:03:37 PM

well ill be damned. gg

1/31/2009 1:20:05 PM