Its that time of year again when the weather warms up and we should be planning rides again. My beu planned out this awesome ride using deere maps. Its about an hour and a half long and contains a ton of grass without the bullshit shrubs...

We normally can get a few people out and ride with us :-) Mostly Husqvarna and John Deere's Craftsman are welcome tho... NO POULAN too high of turn radius

12/3/2008 11:59:57 AM

ngrlvr

12/3/2008 12:01:41 PM

fail

[Edited on December 3, 2008 at 12:02 PM. Reason : only one thread? i expected more from you]

12/3/2008 12:02:26 PM

WHERE'S MAH GODDAMNED MURRAH 11 AT?

12/3/2008 12:19:50 PM

8.9/10

Good execution, but lack the x factor of good parodies ("She sucked my cock" comes to mind."



[Edited on December 3, 2008 at 12:29 PM. Reason : .]

12/3/2008 12:27:27 PM

nigs im a gentleman. respect for the females.

no cock sucking parodies here.

12/3/2008 12:41:42 PM

I have a pretty quick craftsman I'll ride, need some work though. The spark plug wire is pretty bad. I also need to adjust the blade, ive ridden over one too many ant hills and it's a little higher on the right than the left. Makes funny looking fields when you cut. Let me know when you want to do this so I can make sure I get her ready in time. I have a new intake and exhaust I was going to install but I don't know if I'll have time.

12/3/2008 3:01:18 PM

i've been thinking of turning my john deere into a street fighter and pulling off all of the plastic

12/3/2008 3:06:44 PM

Ima bring out my husqvarnabusa and smoke yall f00ls

12/3/2008 3:10:22 PM

My Toro is faster. 34 HP TURBO FORCE

12/3/2008 3:11:54 PM

I had a Toro but didn't like it, laid it down in some wet grass on a turn one time and fucked it up

12/3/2008 3:14:03 PM

Was it the stand up one? Those things are wicked.

12/3/2008 3:19:15 PM

Our commercial mower DID NOT want to crank the other day. It seems it wasn't designed for sub-freezing operation. Flooded terribly...had to pull the plugs and the intake, dry everything out with compressed air, then squirt a little starter fluid directly in the cylinders.

12/3/2008 4:04:48 PM

I'm gonna put a turbo on mine!


I probably shouldn't have said that because that sounds like a fun project

12/3/2008 4:04:53 PM

^

12/3/2008 4:07:58 PM

http://www.thewolfweb.com/message_topic.aspx?topic=544164

12/3/2008 4:41:29 PM