User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » raptor causes machine to shut down Page [1]  
duro982
All American
3088 Posts
user info
edit post

so if i hook up nothing but my raptor and power on, after about 4-5 seconds it just powers down. If i unhook the raptor and hook up the other drives, there's no problem. It's only when the raptor is on that this happens.

Most of my other drives are IDE, but I do have another sata drive that runs fine.

Any ideas?

8/6/2008 8:21:27 PM

Seotaji
All American
34244 Posts
user info
edit post

have you tried it on another machine? are you booting from that drive?

8/6/2008 8:25:07 PM

Yodajammies
All American
3229 Posts
user info
edit post

8/6/2008 8:25:14 PM

duro982
All American
3088 Posts
user info
edit post

haven't tried it in another machine (don't have another box in the house that supports sata). No, i'm not booting from it.

8/6/2008 8:30:37 PM

quagmire02
All American
44225 Posts
user info
edit post

dude, raptors will FUCK YOU UP

8/7/2008 9:02:44 AM

philihp
All American
8349 Posts
user info
edit post

8/7/2008 9:05:33 AM

gs7
All American
2354 Posts
user info
edit post



[Edited on August 7, 2008 at 9:15 AM. Reason : ...]

8/7/2008 9:15:09 AM

quagmire02
All American
44225 Posts
user info
edit post

8/7/2008 9:27:07 AM

stepmaniadud
All American
1056 Posts
user info
edit post

Quote :
""


more like

http://en.wikipedia.org/wiki/Image:Velociraptor_dinoguy2.jpg

[Edited on August 7, 2008 at 9:40 AM. Reason : can't imbed]

8/7/2008 9:39:28 AM

quagmire02
All American
44225 Posts
user info
edit post

^ more like broken image?

but yeah, velociraptors are the smaller raptors, while deinonychus is what was actually portrayed (what's really messed up is that i was such a dino nerd as a kid that i knew this and told everyone i knew when the book came out that crichton was wrong...then i realized that "velociraptor" is more fun to use than deinonychus, so meh)

8/7/2008 9:43:20 AM

shanedidona
All American
728 Posts
user info
edit post

^^ off topic, but what is the answer to #2?

8/11/2008 10:50:38 AM

moron
All American
34142 Posts
user info
edit post

^ It doesn't specify the speed of the other raptors, so i'm not sure you can determine it.

8/11/2008 10:55:25 AM

quagmire02
All American
44225 Posts
user info
edit post

^ but you could use the numbers given in question 1 (assuming the other two raptors aren't injured and that the raptor in question 1 represents the average raptor) to determine how quickly they can cover the distance between them and you...using that information (which should go to illustrate your resourcefulness), you should be able to figure it out

i'm not mathematician, and so my assumptions are probably off, but i would assume that it would be between the injured top raptor and one of the other two healthy raptors...given the speed of the top raptor is diminished, i would assume that you'd run between the two raptors, keeping closer to the injured raptor

assuming the top raptor is at 0°, then i'd guess you'd want to run at either ~40° or ~320°

[Edited on August 11, 2008 at 11:09 AM. Reason : *shrug*]

8/11/2008 11:06:13 AM

moron
All American
34142 Posts
user info
edit post

^ But in question 3 it says raptors run at 10m/s.

If you assume the raptors continuously track you though, that's a fairly complex problem.

[Edited on August 11, 2008 at 11:17 AM. Reason : ]

8/11/2008 11:16:14 AM

quagmire02
All American
44225 Posts
user info
edit post

DAMNATION

8/11/2008 11:17:27 AM

ScHpEnXeL
Suspended
32613 Posts
user info
edit post

haha that test is great

8/11/2008 11:22:56 AM

tchenku
midshipman
18586 Posts
user info
edit post

the correct answer is to put down the raptor eggs and toot the raptor skull

8/11/2008 12:00:21 PM

Prospero
All American
11662 Posts
user info
edit post

#1) just over 4.5 seconds

#2) 120' between raptors, assuming the top raptor is 10m/s, the other two are 25m/s you would then split the 120' between 25 & 10, thus you'd want to run at either 34' (if top raptor is 0') or 326', it may be a bit different if you calculate acceleration into this one as well.

#3) no floor plan given

[Edited on August 11, 2008 at 4:26 PM. Reason : not a math major]

8/11/2008 4:23:28 PM

 Message Boards » Tech Talk » raptor causes machine to shut down Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.39 - our disclaimer.