i believe i have a problem with either my brakes or my wheel barrings...makes some strange low pitched grinding noise when i'm making slow stops...a lot of time its when i'm parking or in the drive through

i was told if someone in the garage jacked up my car they could figure it out pretty easily

let me know...the next time i will be available is monday after about 3pm til whenever or tuesday from 12pm-5pm...i was told that if i offered a case of beer that may help

11/9/2007 11:32:14 PM

You mind if I fuck some african skank in the back and get negro twat goo and spunk on the seats?

11/10/2007 12:15:08 AM

don't you live in your car?

11/10/2007 12:23:34 AM

bttt

11/10/2007 8:13:36 AM

if its a 90-97 model good luck fixin that pos design.

11/10/2007 11:15:28 AM

No fucking doubt. I can't believe that Honda of all manufacturers would have done that.

I actually think it was a ploy to get all service people to resurface rotors on the car, since that is Honda's officially documented method of rotor resurfacing.

11/10/2007 12:28:51 PM

i have pulled the knuckle off them and put the whole damn assembly on the brake lathe many times.

11/10/2007 1:08:56 PM

^ we had a lathe setup just for doing that

11/10/2007 1:13:44 PM

I was the dumbass who pulled out the slide hammer and yanked the spindle.

11/10/2007 2:33:32 PM

youre always yanking the spindle, dan.

11/10/2007 2:47:30 PM

Least I ain't suckin' it...

11/10/2007 2:49:27 PM

its a 98 accord btw

11/10/2007 5:42:13 PM

My 2003 Accord is doing the exact same damn thing.

11/10/2007 8:44:28 PM

^
it's b.c they are the same car mechanically.

same car, similar problems.

i had a wheel bearing (1) go bad on mine, but it was from outside influences. easy to change. if you ran into or over something bad, that would cause it.

have you taken off a wheel just to check things out?

it's a good time to check pad wear, clean and lube the caliper slides, and flush the brake fluid.

keeps the bolts from seizing.

hell, rotate the wheel and check for play.

[Edited on November 10, 2007 at 9:10 PM. Reason : i'm going to do exactly that next weekend.]

11/10/2007 9:09:15 PM

are speedbumps a culprit of this in your opinion? i go over 2 at my apartment all the time plus many going to dh hill etc

11/10/2007 11:40:55 PM

just keep driving it!

11/11/2007 1:55:05 AM

yeah it was pretty good today...only happened once i think

11/11/2007 2:15:54 AM

well, I ran over a 6"x10" concrete block in the middle of I40 a few months back and bent my rear rim/busted my tire. I got a new rim, but now I need to replace that wheel bearing as it has a vibration/hum to it now.

But the scraping brake noise is definitely coming from the front and was happening before I hit the concrete block.

11/11/2007 2:39:13 PM

zxappeal was having some trouble with his accord tires last night. damn things kept smoking and making noise.

11/11/2007 5:03:28 PM

I told you man...there's more tread on the right front than all the rest...I was just trying to even 'em all out a little bit.

11/11/2007 5:31:36 PM

Quote :

"are speedbumps a culprit of this in your opinion?"

not likely, unless they are 5" high and square/you are traveling at 40+mph.

your car is extremely durable. i've got an accord that took years of abuse at the hands of a girl and it keeps on truckin, with regular fluid changes.

[Edited on November 11, 2007 at 5:43 PM. Reason : s]

11/11/2007 5:43:11 PM

Quote :

"damn things kept smoking and making noise. "

11/11/2007 6:06:51 PM

i seem to think it did it more today than yesterdayi was on jackson going to method earlier and it did it but i had been crusing down jackson slow

11/11/2007 6:27:46 PM

i want unfettered asshole to your bunghole, bitch

11/12/2007 3:21:35 AM

no homo

11/12/2007 5:43:50 AM