Okay, my place is getting increasingly cramped - so I had to make a choice between either selling all of my spare gear or getting rid of my bikes before i don't have any floor space left in my apt.

PM me if you are interested


1 Nashbar Full Carbon road fork. Never used. Rake is 43mm with an axle to crown measurement of 370mm. 300mm (length) threadless 1-1/8” (diameter) carbon steerer. only weighs 515g total - but would obviously be even less once you cut it to your specifications.
They retail around $200 (unless on sale, naturally) - I am asking $130 OBO



2 Nashbar Carbon road forks with aluminum steer tubes. Never used. 300mm threadless alloy steerer. Rake is 43mm with an axle to crown measurement of 370mm. 1 1/8 steer tubes. Total weight 585g each. Seen these retail anywhere from $85 - $130. - I am asking $70 each OBO



Ritchey WCS™ Seat Post
Two-bolt design. 236g. (350mm) Diameter 31.6mm.
Retail $60 will take $35 OBO




Profile Designs Ultra FR Riser Bar Double butted 6061 aluminum for strength and lightness. The Ultra FR is available in 60 mm rises for greater stability and control while descending. Specifications: 285 grams. 60 mm rise. $25

12/3/2006 4:12:05 AM

Some other stuff

Shimano hyperglide 7-speed cassette (max 28 tooth). Never Used, still in box $15 (OBO) These are getting increasingly difficult to find



2 sets of tektro V-Brake Levers, never used $10 per set

http://www.byercycles.co.uk/02_18%20Tektro%20brake%20lever%20htm8.jpg

Weyless MTB bar ends
115 mm center-to-end (per my spoke ruler) $10. sorry no pic

Hayes HMX-1 brake Caliper $10 (if you buy one with lever and cable, the run about $90)

SRAM grip shifters (never used)$15 OBO
Left:

Right (7sp):
http://niko-bikes.com/eshop/images/sram%203.0%20rear.jpg

Wellgo WAM-R4 Road Racing Pedals (and cleats), Never used - still in original box. Alloy body. Cr-MO axle. Sealed cartridge bearig/Du bushing. Investment cast cleat, 4` lateral float, SPD shoe compatible. Release and entry tension adjustment and stabilizer pads. 315g pair. Retails $50 - I am asking $30 OBO


VP M-11 MTB pedal w/cleats (still in box). Specs on image

$40 OBO

and
BOAR DB2 hydraulic brake - (front) - these aren't available on the general market. Still have it in the unopened bag it came in. includes lever, line and caliper + mounting hardware. it does not include a rotor (warning, they are Euro style, meaning the front brake and right brake lever correspond unlike what you typically find on bikes in the USA - so they don't work with a traditional American setup) Make offer

I have some more stuff I may throw up here if I can bring myself to part with it.

12/3/2006 6:40:33 PM

also

SunRace JuJu 8 speed cassette. never used - one thing is unusual though, the 12 tooth cog is from a Shimano XT HG (which is nicer anyway) and not sunrace. I swapped the cog because for some reason there are interface issues with 12 tooth HG cogs and the spinergy hubs on one of my bikes - so if you have spinergy wheels, this cassette won't work for you.
(gears:11-12-14-16-18-21-24-28). I don't remember what these retail for, so any decent offer

[Edited on December 4, 2006 at 1:28 AM. Reason : pic]

12/4/2006 1:27:31 AM

Blackburn Frame Pump

I just kept it around the apt. as a spare - it's never even blown up an inner-tube. They retail at $25 so I'll go for $10. If you intend to use it on your bike instead of leaving it at home - it is the 480mm version, so you would need the appropriate frame size. It handles pressures up to 160 psi and has both Presta and Schrader compatibility


I also have a Nashbar one that was given to me, and that I have never used once

I'm saying $10 on this one too, since I'm not sure what it retails for. This is the Large (21.25-22.5) version so if you plan on putting it on your bike, make sure you have the correct frame size.

QBP Travel Agent

I have used these a grand total of 1 time (have 2 of them - I used one on both front & rear), before I upgraded. Travel Doubler setting to allow the use of linear-pull brakes with any levers (ideal for 'cross bikes and tandems). completely perfect condition. They're expensive little things, running about $20 a piece, but I'll sell them for $20 a pair. (check here for cost when new - http://www.performancebike.com/shop/profile.cfm?SKU=2647&subcategory_ID=5221##)

Nashbar Studded Tire (made by Kenda)
Never used. Not sure how many people in the area do snow trail riding, but if you do:

Weight: 950g. 26x1.95. They retail at $80 a set - so again, I'll ask half, or $20 per tire.

Problem Solvers 1 1/4" to 1 1/8” headset reducer kit

If you were one of the unfortunate souls to buy a high end MTB with a 1 1/4 inch head tube about 5-6 years ago and can't find a replacement fork that works (since everything is 1 1/8' now) - here is your solution. I used these a grand total of one ride since I was in between switching to the next year's model XC Mountain Bike frame, so they are in good shape -just have scratches on the black paint, which is inside your frame so it doesn't matter anyway. They can you anywhere between $30 -$50 with shipping, unless you have a sponsor or work in the industry and have a BTI or QBP account - i'll sell them for $15

Shimano Compatible SPD Style Replacement Cleats -never used

$5

I also have a few integrated headsets sitting around, but since they are frame-specific and I'm too lazy to hunt down images, PM if you're looking for one and I'll tell you if I have


Zefal Mt pump.Flexible connexion for Schrader
and adaptators for Presta. Valves
Diameter: 30 mm. Length: 380 mm. Weight 67g. Color black. $10

Performance precision 11t Pulleys

never used - set. retail Reg: $44.99 - $29.99 asking $10

Kalloy Seat clamp 28.66mm

$5

12/4/2006 2:52:51 AM

Blackburn Kamikaze Pump

$10

Tracer double road crankset. square taper (53 39) 170mm crank arm length

$30 OBO


Diadora Scorcher Mountain Shoe size 13 US/46 Euro (still in box)

$30

Cane Creek Hub (silver version). 8/9 compatible

12/4/2006 8:34:24 PM

XT shimano front derailler (34.9mm diameter clamp) it is the one that precedes the one in this pic

12/4/2006 8:53:07 PM