Sig P226 #1




9mm Very nice overall condition with very bright Tru Dot night sights and new set of Hogue Grips. Comes with 2 brand new 15 round mags and recent spring overhaul.

$650

***********************************************

Sig P226 #2




9mm German Mfg, Some holster wear, factory sights and grips. Great trigger. Comes with 3 15 round mags. Overall a very nice gun.

$550

Prices are firm and current CCW or purchase permit required.

6/14/2009 11:52:29 AM

I've got 300 rounds of .223 and 100 rounds of 9mm for sale in Garner if any one needs some reasonably priced ammo. PM me if interested. (Additional note: I'm not at home right now so this is posted off the top of my head and the bullet weights may be wrong but I'm 99% sure that they are correct).

.223
2x 100 round boxes of Federal 55grain FMJ for $45 each, $85 for both.
6x 20 round boxes of Remington UMC 55 grain FMJ for $11 box/$10 box if you buy 5 or 6 boxes.

9mm Luger/Para
2x 50 round boxes of Blazer Brass 115 grain (I think) FMJ for $10 each

[Edited on June 14, 2009 at 11:53 AM. Reason : clarification.]

6/14/2009 11:52:51 AM

I will take the 9mm

PM sent

6/14/2009 11:55:33 AM

no, not technically. You had to be en route to the private weapons range or to hunt.

So, daily? No.

6/14/2009 4:46:24 PM

For sale: I am selling my second Kel - Tec P3-AT .380. It has a max of 50 rounds fired and is in great shape. I have the gun, magazine it came with, lock, and original box (everything if as new).

Selling for 290.00, must have a CCW or Pistol Permit. I can provide pics or arrange to meet if interested.

6/15/2009 1:04:42 AM

Why are you selling it if you don't mind me asking?

6/15/2009 1:20:48 PM

No problem! I have two (same age). I bought two thinking I would carry one and modify the other as a project gun. Money and time aside I never got around to it. Great gun, just now dont need two.

6/15/2009 5:09:51 PM

Taking reasonable offers on the P226's, Inquire by friday or they are going on a friends table this weekend at the the fairgrounds.

6/15/2009 6:37:36 PM

^i'd give you $500 for p226 #1 with the grips and night sights

6/16/2009 9:06:14 AM

PM Sent!

6/16/2009 11:15:54 AM

I don't want to "low ball" you on the #2, but do you know the year that gun was made? When was the spring last replaced?

$400 pending inspection

6/16/2009 11:25:12 AM

The second Sig is between 1993 and 1996. It's one of the older ones with stamped and welded slides.

[Edited on June 16, 2009 at 11:47 AM. Reason : If you really want to know, they have date codes on the recoil rod cover of the slide]

6/16/2009 11:44:44 AM

Sale pending on #1

The recoil spring on #2 was replaced last week and has 0 rounds on it.

[Edited on June 16, 2009 at 12:28 PM. Reason : .]

6/16/2009 12:04:03 PM

P226 #1 sold.

6/18/2009 6:59:19 PM

Just to mention I am taking offers on the Kel Tec. I dont need to sell it so nothing insanely low, but will entertain offers since its my second one.

6/18/2009 10:58:23 PM

^ I have some 380 hollow points cheap if you want to make it a package deal, or just want some to run through your other one.

6/19/2009 12:49:43 AM

Sig P226 #2 did not make it to the gun show this weekend. I did trade the grips out for a set of hogues. The pistol has factory sights, 3 factory 15 round mags and a new recoil spring.

First $425 takes it.

6/23/2009 1:01:16 PM

I have an RCBS single stage loader, powder scale and hopper for sale in excellent condition for $80. I will also sell a 3 piece 9mm die set for $20.

6/24/2009 9:01:59 AM

if you can find primers, you can load 9mm, using your own brass, for 130/1000, using 130 grain plated bullets, thus being able to make glock safe ammo. With cast led/prelubed bullets your cost can be as cheap as $100 per thousand. That means you can make this press pay for itself in 2,000 rounds, much less if you load up some HP ammo for self defense loads.

6/24/2009 6:42:12 PM

^^interested in both, but mainly the die set, is it steel or carbide?

6/24/2009 7:25:43 PM

I've got a Thompson Center Encore I'm thinking of selling. What do you guys think, should I sell it as:

1) the receiver and the black-powder barrel, 270 barrel separate
2) the receiver and the .270 barrel, black-powder separate
3) the receiver alone and each barrel separate


The receiver is the serialized item and has to be sold through and FFL no matter which barrel is attached.

6/24/2009 8:51:14 PM

^ jw, but how much would you want for #2? and for all of it together?

6/24/2009 9:09:25 PM

Quote :

"The receiver is the serialized item and has to be sold through and FFL"

lol wut?

6/24/2009 9:20:57 PM

he is saying that the receiver is considered a gun, in that item even if it has a black powder barrel, as it can be a non muzzle loader as well. not that it requires an FFL to transfer, unless it is across state lines, or jsut for her personal peace of mind.

6/24/2009 9:47:29 PM

i understand the serial number stuff

just wondering why he needs a FFL. doesn't look like he knows that he's selling it across state lines if he doesn't even know how he's selling it.

6/24/2009 9:58:48 PM

I live in Alabama so I usually sell on Gunbroker, thus I do need to ship to an FFL.

Quote :

"how much would you want for #2? and for all of it together?"

I'd probably start the bidding for the barrel and receiver at $500, either combination. I'd start at $100 for the other barrel.

I've also got Leupold scopes that I'll be selling off both as well.

6/24/2009 10:19:59 PM

oh, word

6/24/2009 10:26:19 PM

yup. It is hard to tell where to start the bidding. I sold a Kahr PM9 in under 30 minutes on Gunbroker last month. I started at $450 with a buy now of $550 and it went like nobody's business.

I'm selling these because I want to consolidate my hunting gear into one bow and a Savage 99 in .308 I don't need a blackpowder gun, especially a modern one which defeats the purpose, just to squeeze a few extra weeks that I could spend bow-hunting anyway.

6/24/2009 10:38:45 PM

Is that Encore a pistol receiver or a rifle receiver?

BTW, if anyone's looking for a Sig 225 or 226, then Lawmen's has police trades-ins for $300 and $325 respectively.
I bought the best looking 225, the other two they had were worn out.
The 226s were pretty decent condition.

6/24/2009 11:15:56 PM

Rifle.

Although, looking at both, I don't know why you couldn't just change the stock and attach a small barrel to accomplish the same thing.

6/25/2009 12:10:04 AM

its the CYA bullshit on them from the ATF.

6/25/2009 1:36:54 AM

^^^I've always wanted a sig... i wish I had the money i could spend on that right now... stupid tuition

6/25/2009 9:34:10 AM

Quote :

"Rifle. Although, looking at both, I don't know why you couldn't just change the stock and attach a small barrel to accomplish the same thing."

There's no difference between the two except one says pistol and one says rifle.
They use the same stocks and barrels.

Like kyle said, it's ATF BS. Once a long gun, always a long gun. Putting a pistol grip and barrel on it turns it into a short barreled rifle, which requires the fed tax stamp.

6/25/2009 10:14:20 AM

the best way to stay healthy and happy if you have any SBR items, or any pistols and rifles with parts that match is to make them NOT interchange at ALL. You do not want any set of parts that can be assembled with hand tools, that will yield an item requiring tax stamp that is not already in your name with a tax stamp on hand. Having pistol barrels that are 10 inches long for your bench gun is great, but don't buy ones that will also fit that nice stocked action in the other case, or you may be in for a ride with no lube.

6/25/2009 4:18:30 PM

I have an FN FAL parts kit for sale. This came from a friend on hard times and I have his assurance that it is complete. I know nothing about them. I do know that they are rare. $400.00 firm.



[Edited on June 27, 2009 at 10:17 AM. Reason : goofed the photo]

6/27/2009 10:12:34 AM

Dang!

Here is the big picture I hope,

http://www.thewolfweb.com/photo_photo.aspx?user=19266&photo=508303&filter=

6/27/2009 10:15:51 AM

whoa. neat.

6/27/2009 12:17:12 PM

^^





[Edited on June 28, 2009 at 1:26 PM. Reason : Fixed for Dhherr5]

6/28/2009 1:24:41 PM

Just posted a bunch of stuff on Gunbroker.com Here are the links:

Thompson Center Encore Pro Hunter Receiver
http://www.gunbroker.com/Auction/ViewItem.asp?Item=133614461

.270 Barrel
http://www.gunbroker.com/auction/ViewItem.asp?Item=133614463

.50 Cal Barrel
http://www.gunbroker.com/auction/ViewItem.asp?Item=133614464

Leupold Shotgun / Muzzleloader Scope
http://www.gunbroker.com/auction/ViewItem.asp?Item=133614468

Leupold VX-III 3.5 - 10x40mm Boone & Crockett Scope
http://www.gunbroker.com/auction/ViewItem.asp?Item=133614465

Midwest Industries AR Back Up Sight
http://www.gunbroker.com/auction/ViewItem.asp?Item=133608491


The auctions are up, so I can't pull off to sell specifically to you. If you want to make an offer and the auction doesn't sell, I'll consider you offer after the auction closes. Feel free to PM me and request more pictures or information on the parts.

7/7/2009 9:18:10 PM

Both barrels and the B&C scope are sold.

7/8/2009 8:05:45 AM

was that scope the long range model (30 mm tube) or the standard 1" tube? i have that same scope in the long range tube.

gunbroker is blocked at work

7/8/2009 8:42:04 AM

Both scopes are 1". The receiver has been bid on as well, but not bought.

7/8/2009 7:26:19 PM

Reduced the price for the Kel Tec P3AT .380 to 245.00 since that was what a local vendor offered me but I would rather have someone get it that wants it versus the markup a retailer would get reselling it.

Same goes as above post about condition, etc, and must have a CCW or Permit to buy.

[Edited on July 9, 2009 at 12:21 AM. Reason : details, details...]

7/9/2009 12:20:32 AM

oooo- i like that price... if i ever get paid by my roommates for past bills, I will consider it

7/9/2009 8:24:17 AM

$245 would be a nice price for a P3AT.

Too bad I bought one a couple weeks ago and just got an LCP two days ago.

You should try listing it on http://www.thehighroad.org
You could probably list it for your original asking price and still sell it quickly.

7/9/2009 9:05:08 AM

I'm still considering your P3AT btw, I haven't forgotten about it!

7/9/2009 11:32:05 AM

as much as I dont... NEED a 380..... any chance you will be at the open carry dinner this weekend with that 'for sale' P3AT? /me always has wants, and owning every keltec pistol would be nice....

7/9/2009 4:18:26 PM

I have to work this weekend but still have the P3AT. I am off all next week and could meet to show or sell at any time. Its a great gun but I have zero need for two at the time.

7/10/2009 8:40:50 PM

I will let you know if I am still looking once tomorrow shopping trips are done.

7/10/2009 9:19:32 PM

No problems.. I will also toss in my DeSantis nemesis pocket holster with it. Let me know!

7/10/2009 9:44:01 PM