So I'm trying to get FreePBX operating properly in the office, however I've run into a huge snag when using the FollowMe function.

When using the "Confirm Call" function the call can't be answered on any line other than the primary, as soon as you pick up the alternate number the system disconnects you. Below is the output from the server:

    -- Zap/4-1 answered Local/9760XXXX@from-internal-01b6,2
    -- Local/9760XXXX@from-internal-01b6,1 answered Local/RG-3805-97607917#@from-internal-992b,2
    -- Executing [s@macro-confirm:1] Set("Local/9760XXXX@from-internal-01b6,1", "LOOPCOUNT=0") in new stack
    -- Executing [s@macro-confirm:2] NoOp("Local/9760XXXX@from-internal-01b6,1", "CALLCONFIRMCID: ") in new stack
    -- Executing [s@macro-confirm:3] Set("Local/9760XXXX@from-internal-01b6,1", "__MACRO_RESULT=ABORT") in new stack
    -- Executing [s@macro-confirm:4] Set("Local/9760XXXX@from-internal-01b6,1", "MSG1=incoming-call-1-accept-2-decline") in new stack
    -- Executing [s@macro-confirm:5] Read("Local/9760XXXX@from-internal-01b6,1", "INPUT|incoming-call-1-accept-2-decline|1||1|5") in new stack
    -- Accepting a maximum of 1 digits.
    -- User disconnected

3/27/2008 11:25:20 AM

it's disconnecting because you haven't set up the confirm message

there isn't one recorded by default (even though freepbx would lead you to believe otherwise)

record something like "press 1 to accept, 2 to drop" and set it to the confirm message

4/10/2008 1:04:36 PM