well my ps2 has shit the bedmoney to anyone who can fix itpretty sure its in the ribbon or line that connects the board to the laser...was workin ok then starting gettin disc read errors, cleaned the lens worked the motor a lil and it worked again fine for a few days, now when i open it the laser wont even light or move and the tray wont budge either.
12/21/2006 1:47:20 AM
oops. I had to do a little of that recently too, readjusted the angle of the laser to the disc to fix my 'disc read errors' for pretty much all dark colored discs. No problems really but i didn't do anything that would mess with all those cables connected to the disc reader. I did almost break the cables to the power and eject buttons, that was a close one....
12/21/2006 2:03:17 AM
all the cables are connected and in placei think the port is the problem, the port to the main board and I dont wanna mess with it that much and screw something completely up, i'll just take off the laser cover and let someone that knows what they are doing do the rest.
12/21/2006 2:18:18 AM
ps3
12/21/2006 6:55:38 AM
no ps2
12/21/2006 3:29:25 PM
Shit, Holmes! NOS GUITAR HERO! NOS PS2!
12/21/2006 5:51:21 PM
It's all part of Sony's master plan, all PS2s are programmed to self destruct shortly after the advent of the PS3, forcing you to buy more Sony products, and hopefully a PS3.
12/21/2006 7:23:25 PM
12/21/2006 9:11:20 PM
anyone???traced it to the ribbon today or the port that the ribbon connects to...lemme know
12/29/2006 11:47:07 PM
yo does anyone know how to fix a disk read error...i sent my ps2 to get fixed for free in 2004, but the disk read error came back
12/29/2006 11:52:20 PM
the same shit happened to me with a ps2 that was 2 years out of warranty, i just started to exchange emails with sony and they took my out of warranty ps2 and sent me a new one, all i had to do was pay for shipping both ways
12/30/2006 12:36:55 AM
What version of ps2 is it, and is it the sickening flat one?
12/30/2006 12:46:02 AM
not sure of the version but its the fat one not the slim so theres alot of room to work with find out the version tomorrow, anyone on this?
1/1/2007 7:14:05 PM